Failure Analysis Expert Witnesses: 49

Dan W. Wall, BSME, specializes in the fields of Accident Reconstruction, Biomechanics and Motor Vehicle Injury Causation, Human Factors, and Injury Prevention in Motor Vehicle Design. Mr. Wall is fully accredited with ACTAR (Accreditation Commission for Traffic Accident Reconstruction), ACTAR No. 1140.

Dan Wall has conducted scientific and engineering analysis of motor vehicle collisions since 1987 for both plaintiff and the defense in civil and criminal cases. A qualified expert witness since 1987, he has offered litigation support services to insurance companies and attorneys in Arizona, California, Colorado, Tennessee and Louisiana and has testified in both Civil and Federal Courts.

Mr. Wall's past cases have involved commercial vehicle design and analysis, insurance investigations, low speed collisions and injury analysis, motorcycle collisions and rider analysis, vehicle handling and dynamics, seat belt analysis and injury mitigation, tire failures and rollover analysis, general accident reconstruction, and roadway analysis. He has conducted human factor analysis including reaction and perception, environmental effects, and general driver behavior. With a large library and the tools needed to do all types of motor vehicle reconstruction investigations, Mr. Wall is an asset to any team.

Dan Wall currently owns and rides a Harley Davidson Ultra Electra Glide Classic motorcycle and has gone through various levels of motorcycle training. He also has extensive experience as a boat operator and Marine Instructor.

For more information, visit www.wallaccidentreconstruction.com

Also view Dan Wall's article in Attorney At Law Magazine at http://attorneyatlawmagazine.com/phoenix/2014/01/17/accident-reconstruction-expert-dan-wall/

Areas of Expertise:

Mechanical Engineering Biomechanics Human Factors Accident Reconstruction Failure Analysis Forensic Investigation Motor Vehicle Design Dynamics and Handling Motorcycles Commercial Vehicles Rollovers Signage

Conspicuity Low Speed Collisions Marine Safety Bicycles Slip and Fall Accidents Pedestrians Accidents Tire Failure Seat Belt Issues Road Defects Off Road Driving Accidents Construction Zones Product Liability

View Dan Wall's Consulting Profile.

Cassandra K. Moody, MS, PE, the President and Principal Engineer of Time For Change, LLC., is a professional engineer with nearly 15 years of Pipeline Engineering and Operations experience encompassing Integrity Management Program (IMP) responsibilities.

Litigation Support - As a proficient expert in the midstream pipeline industry, Mrs. Moody has represented both plaintiffs and defendants on a variety of cases, both by testimony and through expert opinion reports. In-the-ditch pipeline operator expertise sets her apart from other desktop “experts.” Mrs. Moody’s retained engagements as an independent engineering expert have resulted in favorable resolutions for 100% of her clients to date.  Mrs. Moody is an effective communicator who excels at presenting complex information simply, both written and verbally.

Subject Matter Expertise:

Pipeline Integrity Management Midstream Pipeline Design Midstream Pipeline Operations Pipeline Project Management Pipeline Safety Management Systems

Risk and Threat Assessment Continuous Improvement Change Management Principles Regulatory Compliance Failure Analysis

Background Experience - Prior to establishing her own consultancy firm, she served in various regional operations engineering capacities, leading people and managing projects for a midsize North American pipeline operator as an Operations Engineer. Mrs. Moody has performed practical operations analysis of new and existing pipeline systems and facilities, of both natural gas and hazardous liquid product types, from operability optimizations, cost consciousness, and regulatory compliance perspectives throughout her career. She offers innovative solutions to achieve safe and efficient operations while communicating visionary changes in processes and procedures through training and encouragement across all levels of organizations to result in lasting, favorable change.

Mrs. Moody's company maintains national and local certifications as a Women’s Owned Small Business (WOSB), Women’s Business Enterprise (WBE), and is recognized as a Historically Underutilized Business (HUB) in the state of Texas. She was a founding leadership team member of Young Pipeline Professionals, USA (YPP USA) and is active with the Society of Women Engineers – Houston Section (SWE) where she enjoys encouraging the next generation through activities such as Introduce a Girl to Engineering Day outreach events. 

Mrs. Moody attributes her ability to support a wide variety of projects to her broad education foundation where she earned undergraduate Bachelor of Science degrees in Biochemistry and Genetics from Texas A&M University and a Master of Science in Environmental Engineering through the University of Houston. She is registered with the Texas Board of Professional Engineers and Land Surveyors as a Mechanical Engineer.

Bransford Pickett, PE, DFE, BSc, MScBA, has over 25 years of experience as a Mechanical Engineer. SEFS expertise includes design and review of material handling equipment, material handling management, and ship board systems. SEFS offers litigation support services for Accident Investigation and Reconstruction covering failure analysis, process simulation, regulatory compliance, equipment reliability, and personal injury / safety. His materials handling and engineering services are offered to attorneys, insurance and end user companies nationally and internationally.

Mr. Pickett is a member on the American Society of Mechanical Engineers B30 committee on Safety Codes and Standards for cranes and rigging as well as a member of several subcommittees. He is also a member of American Society of Mechanical Engineers P30 Committee- Planning for the Use of Cranes, Derricks, Hoists, Cableways and Lifting Accessories. ASME BTH Standards Committee.

Mr. Pickett is a Professional Engineer, and holds a BSE from the University of Michigan, Ann Arbor, and a MScBA in Finance from San Diego State University, as well as a board certified Diplomate Forensic Engineer. He has qualified as an expert witness in the State of New York Supreme Court and the State of California Supreme Court.

Accident Investigation:

• Man baskets, Forklifts, Scissors Lifts, Aerial Lifts, Rigging Gear, Hydraulic Jacks, and Hydraulic / pneumatic Lift Systems, Automotive Lift Systems, Conveyors, Pallet and Packages Conveyors, Pneumatic Systems, Machine tools, Boats, Barges, and Elevators
• Tower, Mobile, Bridge, Truck, Portal, Container, Jib and Floating Barge Cranes, and Derricks
• Operator training compliance to National Commission for the Certification of Crane Operators, NCCCO, requirements for tower crane, mobile crane, overhead crane, articulating crane operator training and certification, signal person, and rigger certification
• Compliance covers applicable national and international standards that include the ABS, ASTM, ASM, ASME, ANSI, WSTDA, ALI, etc. and DIN, EN, FEM to list a few. National regulations include state and federal OSHA requirements as well as DOE, military specifications and standards

View Bransford Pickett's Consulting Profile.

Thomas W. Caldwell, PE, has over 40 years of experience in Materials Research and Development, Process and Product Development, and Manufacturing Operations in the Precision Cast and Machined Products industry.

Mr. Caldwell has designed and manufactured components for consumer and industrial products, including safety-critical applications such as aircraft landing gear brakes, seat belt lockup devices, windshield wiper, and window lift motor systems. He has experience creating and guiding technology development and manufacturing partnerships in Europe and Asia, licensing and selling intellectual property and creating supply chains in China.

Mr. Caldwell has lectured in the USA, Germany, Switzerland, and India on manufacturing premium quality metal products and manufacturing processes, and was a technical paper peer reviewer for 20 years for the Society of Automotive Engineers. A United States patent holder, he has published peer reviewed research in electrochemistry and materials processing, and has written and spoken numerous times on the subject of Materials Selection.

Litigation Support - Thomas W. Caldwell, PE, is a testifying and consulting expert for both plaintiff and defense counsel. His cases involve product failure for ferrous and non-ferrous alloy products such as hand tools, recreational and exercise equipment, fire fighting apparatus, rotating industrial machinery, construction hardware, piping, and lighting fixtures. Mr. Caldwell utilizes destructive and non-destructive methods for insuring product integrity.

Areas of Expertise:

Design Engineering Materials Failure Analysis Materials Engineering Mechanical Engineering Metallurgy Power Tools Products Liability Design Defects

Manufacturing Defects Fitness for Use Equipment Operation and Maintenance Accident Reconstruction Material Selection Manufacturing Process Design and Scale Up Safety Component Product Quality Control Safety Component Quality Systems Management

View Thomas A. Caldwell's Consulting Profile.

Mechanical Engineer - Turbomachinery Expert. Gas turbine engines, steam turbines, jet engines, compressors, pumps, expanders, generators, cogeneration, combustion equipment, diesel engines, and reciprocating compressors. 

Failure analysis, stress analysis, mechanical design, design analysis, troubleshooting, performance analysis, durability assessment. Access to metallurgical laboratory. Experienced Expert witness. 

Please see our Service List at https://sbkushnick.com/servicelist.pdf for a concise description.

Christopher M. Daft, PhD, is an award winning, Oxford Educated scientist whose areas of expertise include medical imaging, artificial intelligence, semiconductors, medical devices, sensors, MEMS, signal processing, and image processing. He holds 23 United States Patents with 20 applications pending, Dr. Daft has diverse industry experience including multi-nationals such as GE, Medtronic, Fujifilm, Samsung, and Siemens as well as several start-ups. 

He has testified at trial 5 times and been deposed 15 times.

Dr. Daft has been an Institute of Electrical and Electronic Engineers (IEEE) Senior Member since 2004. He has three years of experience teaching electrical and computer engineering at the University of Illinois. 

Dr. Daft holds a BA and MA in Physics from Oxford University as well as Doctorate from Oxford in Materials Science.

Litigation Support - Dr. Daft provides litigation support in the areas of Intellectual Property and Medical Devices including Imaging, particularly Medical, Patents, and more. His experience includes a variety of cases in the areas of wearable electronics, imaging systems, and surgical technology. Dr. Daft has extensive deposition and trial testimony experience.

Areas of Expertise:

Design Engineering Electrical Engineering Electromagnetic Engineering Microelectronics Medical Imaging Electronics Semiconductors

Medical Devices Sensors Software Engineering MEMS Signal Processing Image Processing Physics

View Dr. Christopher Daft's Consulting Profile.

Consultants. Experts. Innovators.™

Operating from more than 110+ offices around the globe, we provide services to corporations, insurance companies, law firms, and government agencies. 

Our quantum and delay experts are experienced in the following areas:

Adjudication Arbitration Assistance in the Preparation of Pleadings Attendance at Hearings Compilation of Evidence Conciliation Deposition Disclosure and Discovery Dispute Advisory Boards (DABs)

Dispute Management Strategy Implementation Dispute Resolution Boards (DRBs) Early Neutral Evaluation (ENE) Expert Determination Factual Witness Statements Litigation Mediation Structured Negotiation Tactical Dispute Management Advice

Whether the matter relates to construction or insurance, we bring years of valuable industry experience to help our clients limit long and costly formal proceedings. Our experts can operate individually or collaboratively as an integrated team, providing clients with unbiased assessments of construction delays and their cost implications and contract dispute assistance. Backed by evidence and research, Rimkus experts serve as impartial voices, presenting compelling arguments and providing professional testimony that sheds light on the critical intricacies of complex, global issues.

Rimkus Global Services Overview

OUR EXPERT SERVICES EXPERTISE

DELAY EXPERTS

Construction delays can have significant financial implications and lead to strained relationships on a project. Rimkus delay experts understand schedules, project management, and contractual obligations. We can analyze complex timelines, identify causation, measure the effect on the project’s deliverables, and provide expert opinions that stand up to scrutiny in legal proceedings. Our Delay Experts are experienced in the following areas:

• Extension of Time Assessment
• Disruption Analysis
• Project Planning
• 4D Modelling and Visualization

QUANTUM EXPERTS

Quantum disputes require a unique set of skills and expertise. Rimkus’ quantum expert witnesses specialise in evaluating and quantifying the financial loss or damage from a variety of matters, including breaches of contract, valuation issues, or financial loss claims. In addition, our team is often engaged on expert advisory commissions, helping clients build an appropriate commercial strategy to navigate a complicated or contentious issue and assisting the client in achieving its targets. Our quantum specialists are well-versed in all aspects of dispute resolution, whether through litigation, arbitration, adjudication, mediation, or complex negotiation. Several members of the Rimkus quantum team are multilingual, allowing us to help clients from jurisdictions across the globe. Our Quantum Experts are experienced in the following areas: 

• Contract Administration
• Damages Claims 
• Quantity Surveying Best Practice
• Quantum Assessment and Analysis
• Loss and Expense Claims 

Visit our full suite of: Delay and Quantum Expert Services.

GLOBAL OFFICES

Rimkus operates from 110+ offices worldwide, with headquarters in the following cities.

Australia Grosvenor Place, Level 31 225 George Street Sydney NSW 2000 Phone: +61 2 9290 1495 Email: APEnquiries@rimkus.com

Malaysia Menara Citibank Suite 20.04 Level 20, 165 Jalan Ampang 50450 Kuala Lumpur Phone: +60 3 9212 1204 Email: APEnquiries@rimkus.com

New Zealand Level 2, 1 Broadway Newmarket Auckland 1023 Phone: +64 9 5201929 Email: APEnquiries@rimkus.com

Singapore  138 Market Street Level 5, CapitaGreen 048946 Phone: +65 6016 6057 Email: APEnquiries@rimkus.com

United Kingdom 5th Floor 40 Lime Street London EC3M 7AW Phone: +44 12 5767 6107 Email: EurEnquiries@rimkus.com

United States 12140 Wickchester Ln Ste 300 Houston Texas Phone: +1 800 580 3228 Email: Expert@rimkus.com

View a full list of Rimkus Office Locations.

View Rimkus Forensic Expert Services Profile. 
View Rimkus Life Sciences Expert Services Profile.

Mark E. Rieser, II, MS, PE, AIA, GBC, GEC has over 30 years of experience in the Engineering, Architectural, Construction, and Building Design industry. He provides his clients with a comprehensive knowledge of Engineering, Construction Technology and Construction Standards of Professional Practice. 

Background Experience - President of an “active” Design and Building company with a professional staff and Headquarter offices in San Jose and Los Angeles, and offices in Sacramento and San Francisco. Mr. Rieser has managed, designed, and constructed over 4,000 units to include high-rise, single family homes, condominiums, townhomes, podiums, apartments, and commercial buildings, His experience includes building and roadway design, construction, management, with designs of over 500 miles of asphalt and roadway improvements, tunnels, San Francisco Airport, Santa Clara Light Rail, Southern Pacific Railroad, Caltrans, and BART. 

Mr. Rieser has an insightful understanding of Civil / Structural Engineering, Soil Engineering, Transportation, Traffic Engineering, Hydraulic Engineering, Safety Expert, OSHA Standards, Architectural Design, Asphalt Design, Cost Estimation, Public Works Design Bidding and Estimation, General Engineering, General Building, and an Accident Reconstruction expert. “Our bids are not just a tool but are numbers that we be use to finish the work, accurately, on-time, and safely.” 

Forensic Construction and Engineering - Mark Rieser is a renowned forensic expert with the knowledge to safeguard clients from unwanted litigation as well as support both plaintiffs and defendants. He works closely with insurance companies and attorneys on various public, city, and state cases throughout the western United States. To date, he has been designated as an expert in over 550 Forensic Construction and Engineering cases throughout the United States. Mr. Rieser has been designated and testified Court as an expert in the following categories:

Traffic Engineer Transportation Engineer Architect Safety Expert General Building Contractor Civil Engineer General Engineering Contractor Roofing

Estimator Soils Caltrans Standards Structural analysis Hydraulics OSHA Standards Construction Management Waterproofing

NorCal Headquarters San Jose Office 2033 Gateway Pl Suite 500 San Jose, CA 95110	San Francisco Office 425 Market St Suite 2200 San Francisco, CA 94105	SoCal Headquarters Los Angeles Office 10100 Santa Monica Blvd. Suite 300 Los Angeles, CA 90067	Sacramento Office 777 Campus Commons Rd Suite 200 Sacramento, CA 95825

View Mark Rieser's Consulting Profile.

Expert Background: Dr. Thomas L. Read is the Principal and CEO at A. Read Consulting, LLC. He received his PhD. from Stanford University in 1972 and has over 25 years of manufacturing experience in electronics, metallurgy, factory safety, failure analysis, glass fracture, glass failure and bottle failure. As a member of the electronics industry, he has earned process patents and has an extensive background in manufacturing techniques. In parallel, Dr. Read has spent over twenty five years as a consultant to attorneys and engineers. He has given more than 100 depositions and has appeared in court numerous times. Company Profile: Read Consulting, LLC is a full service laboratory providing services in the following areas:

• Failure Analysis; Factory Safety and Personal Injury (including machine guards and manufacturing safety)
• Glass Failure Analysis - Glass Fracture, Glass Failures and Bottle Failure
• Metal and Ceramic Failure
• Grinding Wheel Failures
• Intellectual Property and Patent Disputes
• Product Liability and Product Quality
• Manufacturing Disagreements (such as Intellectual Property, Failed equipment and Contract Disputes)
• Reverse Engineering

Non-testifying consulting support for counsel on matters involving fall protection and access systems, including BMU, suspended, and permanent access systems (U.S. and International)

Rauch Safety & Engineering provides non-testifying technical consulting to counsel in matters involving fall protection systems, façade access systems (including Building Maintenance Units – BMUs), and permanent access infrastructure.

Engagements are typically initiated prior to expert designation to evaluate the technical validity of a claim, defense, or opposing position. This allows counsel to determine whether a matter is structurally sound before proceeding into formal expert pathways.

Work focuses on system failures, installation alignment, and responsibility across design, manufacturing, and construction, particularly where breakdowns occur between design intent and real-world conditions.

Scope includes analysis of:

• System design and engineering intent 
• Installation and commissioning conditions
• Lifecycle use and maintenance environments
• Alignment with applicable standards (OSHA, ANSI, IWCA)

RSE is engaged to:

• Evaluate case feasibility and technical merit
• Identify system failures, misalignment, and responsibility gaps
• Analyze construction defects and performance issues
• Review and assess opposing expert reports 
• Determine design vs. installation discrepancies 

RSE operates independently of contractors, manufacturers, and installers, providing unbiased technical evaluation grounded in real-world system behavior across the full system lifecycle.

All engagements are strictly non-testifying and available across U.S. and international matters.

Key Services

• Early Case Technical Evaluation (Fall Protection & Access Systems)
• Construction Defect & System Performance Analysis (Fall Protection & Access Systems)
• Failure Analysis – Fall Protection & Access Systems
• BMU / Façade Access System Review
• Suspended Access & Permanent Access System Evaluation
• Commissioning & Installation Condition Review (Fall Protection & Access Systems)
• Lifecycle & Maintenance Condition Assessment (Fall Protection & Access Systems)
• OSHA / ANSI / IWCA Standards Interpretation (as applicable to Fall Protection & Access Systems)
• Expert Report Review & Rebuttal Support (Non-testifying, Fall Protection & Access Systems)
• Design vs. Installation Discrepancy Analysis (Fall Protection & Access Systems)

Positioning Statement

RSE provides non-testifying consulting support to counsel requiring a clear, technically grounded understanding of fall protection and access systems and their real-world performance, particularly in matters where design, manufacturing, installation, and operational realities intersect.

Areas of Expertise:

Fall Protection Systems Failure Façade Access Systems Failure Building Maintenance Units (BMU) Failure Suspended Access Systems Failure Permanent Access Systems Roof Anchor Systems Failure Lifeline Systems Failure Suspended Platform Failure Construction Safety Failure Building Maintenance Accident Construction Defect Analysis Construction Dispute Support Design vs Installation Discrepancies

System Performance Failure Infrastructure Access System Failures Access System Commissioning Issues Installation vs Design Intent Conflict Contractor Responsibility Analysis OEM Responsibility Analysis OSHA Compliance Review ANSI Standards / IWCA Standards Failure Analysis Construction Systems Mechanical Building Systems Lifecycle System Analysis Commissioning Review Maintenance Conditions

View Rauch Safety and Engineering's Consulting Profile.

As an arbitrator, structural/civil engineer, and expert forensic consultant with nearly four decades of experience, Casey Hemmatyar has provided extensive expert services for defendants’ and plaintiffs’ attorneys on numerous construction litigation matters throughout the United States and Canada.

He has been retained as an expert engineer in over one hundred litigation matters on single and class-action legal cases by the U.S. government, law firms, and insurance carriers at the State and Federal levels, working with both plaintiff and defendant sides.

A partial list of litigation cases is available upon request. His understanding of core engineering and legal concepts has enabled him to assist a wide range of clientele effectively. He brings diversified experience in structural and civil engineering design and forensic engineering, investigation, and evaluation.

He also conducts research, has assisted in the development of building codes and standards, and has supervised the construction of domestic and international projects. His experience includes special structures and new buildings as well as modifications, alterations, seismic/hurricane retrofits, and upgrades to existing structures. He has provided failure analysis, expert consultation, structural forensic investigation, and damage assessment services for numerous litigation and insurance-related matters.

He actively presents continuing education lectures to audiences of licensed engineers, architects, and general contractors on topics of structural and forensic engineering throughout North America. Mr. Hemmatyar has been the principal structural engineer on high-profile projects for prestigious clients, including NASA and other notable organizations.  Currently, he directs PSFEG and has served as Director for SEAOSC from 2011 to 2013.

His work encompasses a diverse range of structures, including hospitals,  educational institutions (including schools and universities), telecommunication centers, aviation facilities, government buildings, laboratories, as well as commercial, industrial, and residential structures.

Scale Your Law firm with Iron-clad strategies using Preeminent Solutions, Inc.'s Structural Engineering and Construction Defect experts! Smart Litigators Understand the POWER of Strong Expert Support to Avoid:

• Missed Deadlines
• Ineffective Strategy
• Testimony

At Preeminent Solutions, their Construction Defect and Structural Engineering Subject Matter Experts (SMEs) have over 20 years of design, construction, and forensic experience. Their team of licensed professional structural engineers prioritize your case to produce bullet-proof litigation strategy, higher odds of success, and higher odds of payout for your case.

Licensed in Florid, California, Georgia, and several other states.

Areas of Expertise:

Building Codes Building Envelope Failure Building Collapses Warehouse Collapses Tower Collapse Structural Collapse Forensic Investigations Water Intrusion Code Review Drawing Review Construction Safety & Related Codes Fall Protection Standard of Care Analysis Structural Steel & Building Failure Studies Concrete Failure Studies Specialty Metal Failure Studies Cold-Form Steel Failure Aluminum Failure Steel Section Loss

Accident Reconstruction & Investigations Standard of Cause Origin and Cause Concrete Defects Steel Defects Hurricane Damage Storm Damage Wind Damage Flood Damage Stucco Defect Foundation Defect Roof Damage Commercial Roof Failure Historical Building Restoration Tower Restoration Industrial Design Pre-Cast Concrete Failure Wood Failure Reinforced Concrete Failure

• BACKGROUND:

40+ years' experience including in product design, product development, and manufacturing in consumer, medical, and industrial product markets. Product innovation part-time academic since 2009, public speaker since 1985. Certified New Product Development Professional (NPDP) since 2008 by the Product Development and Management Association. Member of: Society of Plastics Engineers, Society of Manufacturing Engineers, American Society for Quality. Expert witness services to Product Liability, Intellectual Property, and Commercial Dispute litigators.

• PRODUCT LIABILTY EXPERTISE:

Retained by both plaintiff and defense counsel. Specialize in personal injury cases involving product defects, manufacturing defects, product safety, engineering design, mechanical failures, material failures, product quality assurance, and foreseeable misuse. 

• CASE EXAMPLES:

• Retained in cases involving 3M, Honeywell, Clorox, Ace Hardware, and others. 
• 3M Combat Arms earplug case, retained by two plaintiff firms. More at, https://bit.ly/Forbes-on-3M Daubert ruling at, https://bit.ly/EPR-3MEP-Daubert (Page 98). Two depositions. (Plaintiff) 
• Furniture review of the state of competitive product safety, mechanisms, warnings. Counsel represented major insurance company. Settled after report. (Defense) 
• N95 mask commercial dispute, settled after report. (Plaintiff) 
• Consumer electronics patent infringement, settled after report. (Defense) 

• MORE INFO AT:

Expert witness services offered can be seen at, https://bit.ly/PDEWS Preferred contact: eric@pinnaclepi.com

Content above is a selection of work, current case history available upon request. Expert witness testimonials at, https://bit.ly/EPR-EWT

• EXPERT WITNESS PODCAST INTERVIEW

With more than 27 years of experience in Big 4 consulting, Steve Ditty is a distinguished Software Expert Witness specializing in ERP software litigation, software failure analysis, and expert testimony. His expertise spans enterprise software implementation, project management, and litigation support, making him a key figure in complex ERP lawsuits. As a testifying expert, he has played a critical role in high-stakes disputes across North America, Europe, and Asia. 

Steve has provided expert witness consulting and litigation support for Fortune 500 corporations and public sector organizations, offering expert reports, depositions, rebuttals, forensic software analysis, and trial testimony in major ERP lawsuits. 

As a recognized authority in software litigation, his testimony has been instrumental in ERP failure cases involving SAP, Oracle, Microsoft Dynamics, Infor, NetSuite, and other enterprise platforms. His knowledge of ERP implementation failures, contract disputes, and project overruns makes him one of the most sought-after professionals in software litigation support. 

Areas of Expertise:

Software Expert Witness & Testimony ERP Litigation Support & Case Analysis Enterprise Software Dispute Resolution Expert Report Writing & Deposition Testimony Forensic Software Analysis & Root Cause Investigations

Project Management & ERP Implementation Consulting IT Contract Disputes & Risk Assessment Legal Support for Software Failure Cases Complex ERP System Audits & Compliance Evaluations Software Selection, Vendor Performance Evaluation & IV&V

Harold E. McGowen, III, PE, is a proven authority in Oil and Gas exploration and development. As an engineer and businessman with 40+ years of experience building and leading oil and gas companies, he provides technical acumen, clear communication, and industry knowledge in cases involving trade secrets, patents, securities, operational failures, and safety. 

---

Expertise in Trade Secrets and Patents

• Harold has testified in numerous intellectual property disputes involving downhole tools, hydraulic fracturing, and drilling technologies.
• His ability to evaluate technical designs and assess claims of patent infringement or trade secret misappropriation is grounded in decades of hands-on industry experience and as an expert on numerous patent cases.
• He links technical insights to business and legal outcomes, delivering fact-based conclusions that resonate with courts and juries.

---

Securities Litigation Proficiency

• Harold’s expertise includes evaluating whether companies accurately represented reserves, operational performance, and development strategies to investors.
• His testimony has been instrumental where overstated reserves or misleading economic projections were alleged, focusing on adherence to reasonable claims and industry best practices.

---

Broad Litigation Experience

• Harold has provided expert testimony and litigation support in over 40 cases, addressing issues such as operational failures, safety lapses, and intellectual property disputes.
• He consistently ties technical findings to best practices and organizational responsibilities, ensuring clarity and relevance for legal audiences.

---

Leadership and Innovation

• As CEO of oil and gas operating companies, Harold led multimillion-dollar projects, optimizing drilling and completion strategies and ensuring compliance with industry standards.
• He has authored technical papers and presented on topics including hydraulic fracturing, drilling optimization, and project management.

---

Harold’s unique combination of technical expertise, hands-on experience, and litigation support experience ensures clear communication with attorneys, judges, and juries. For trade secrets, patents, securities disputes, or operational safety cases, Harold E. McGowen III, PE, delivers clarity, credibility, and results.

View Harold McGowen's Business Consulting Profile.