Power Plants Expert Witnesses: 6

Dr. John N. O’Brien has over 45 years of experience in Energy Markets, Technology, and Regulation as a thought leader and as an expert in the analysis of energy economics, and promulgation and enforcement of energy laws and regulation. 

Before he began providing litigation support services, Dr. O'Brien spent 10 years as a Full Scientist at the US Department of Energy’s Brookhaven National Laboratory in its Department of Nuclear Energy (1976-1985),13 years as founder and CEO of several significant energy companies (1985-1998), 25 years as a high-level energy consultant and advisor with several nationally recognized consulting firms advising substantial corporate entities (1998-Present), and 20 years providing energy-related expert litigation support.

Litigation Support - Dr. O'Brien is a highly experienced litigation support expert having been engaged as a primary expert witness and subject matter expert in over 25 different judicial actions as well as numerous administrative regulatory proceedings involving energy-related matters. His extensive prior history as a high-level advisor in the energy sector has contributed to the success of numerous judicial matters in which he has been engaged resulting in well over $3.5 Billion in judicial recoveries for his clients.

Dr. O'Brien possesses a very broad and deep level of expertise and extensive experience in the energy industry. He fully understands the details of energy regulatory economics as well as adherence to the applicable procedural and evidentiary requirements of judicial and regulatory litigation.

Areas of Expertise:

Mechanical Engineer - Turbomachinery Expert. Gas turbine engines, steam turbines, jet engines, compressors, pumps, expanders, generators, cogeneration, combustion equipment, diesel engines, and reciprocating compressors. 

Failure analysis, stress analysis, mechanical design, design analysis, troubleshooting, performance analysis, durability assessment. Access to metallurgical laboratory. Experienced Expert witness. 

Please see our Service List at https://sbkushnick.com/servicelist.pdf for a concise description.

Mechanical Solutions, Inc. (MSI) performs litigation support through its extensive engineering capabilities, and when required, through expert testimony. MSI uses advanced finite element analysis (FEA), rotor dynamics, and torsional analysis tools, and uses computational fluid dynamics (CFD) to analyze 3-D steady or unsteady fluid flows and heat transfer, enabled by its 230 high speed processor supercomputers.

MSI also uses top-of-the-line testing equipment, including multichannel FFT analyzers (up to 200 simultaneous channels) to accurately read the outputs of various vibration, stress/strain, and pressure sensors, as a function of both time and frequency. As a unique additional test capability, MSI uses motion magnification video cameras to amplify and display scene vibration by 1000x. MSI uses calibrated exciters while equipment remains running, to locate structural, rotor, and acoustic natural frequency resonances as they exist at any particular operating point, without interfering with machinery operation. In addition, MSI performs stress, acoustic, dynamic pressure pulsation, electric current spectrum, and aero/hydraulic performance testing.

Areas of Expertise:

Solving Challenges with Rotating Machinery Vibrations

William D. Marscher, PE, performs expert witnessing and engineering work in the field of Fluid Systems and their Rotating and Reciprocating Machinery, particularly large turbines, generators, compressors, and pumps. His typical work responsibilities include design, analysis, and testing of all types of plant machinery, as well as other types of fluid and mechanical systems. Mr. Marscher has background in various types of turbines (including hydraulic, steam, and gas), as well as various types of pumps, including centrifugal as well as positive displacement (e.g. reciprocating, gear, rotary, and screw).

Mr. Marscher's expert witnessing experience includes 27 cases over the course of his 50+ year career, for which he provided detailed engineering reports in support of the case. This legal support experience includes witnessing in front of tribunals four times, and testifying in Federal Court in four cases. He also has performed depositions 11 times. 

For the past 45 years, Mr. Marscher has been a voting member of the ASTM Fatigue Standards Committee E9, as well as the ASTM Wear & Erosion Standards Committee G2. He is also the past Board of Directors Chairman for the Machinery Failure Prevention Technology Society (MFPT), and has been active in the Vibration Institute. Mr. Marscher is a 23-year member of the Texas A&M Turbine-Pump Users Symposium Advisory Committee (essentially the Board of Directors for the Symposium). For ASME, he was Chair of the Predictive Maintenance committee and was Organizing and Presiding Chair of the 1993 RoCon Rotating Machinery Conference and the 1995 Tribology Conference.

Dr. Edward Bennett is MSI’s VP of Fluids Engineering.  Dr. Bennett graduated from the Naval Academy, following which he was a navy test pilot.  Later he received his PhD in Fluid Dynamics from Johns Hopkins University. Dr. Bennett has been a well-known leader in Fluid Dynamics and the Aero/hydrodynamic Design of Turbomachinery for the past thirty plus years.  

In 1995, Dr. Bennett founded ASC Turbo, a design house that combined the CFD software from Advanced Scientific Computing and specialized turbomachinery design software.  During this time, he worked on the development of BladeGen, a 3-dimensional turbomachinery blade geometry kernel, and also performed a key role design work that included the starter turbine and vapor cycle compressor for the F-22 Raptor fighter, several biomechanical cardiac pumps, a LOX rocket turbopump, as well as numerous more “conventional” turbomachinery designs. After this, he served as Director of Turbopumps for Gencorp Aerojet, and authored the hydraulic design methodology that is still in use by that organization.

At MSI, Dr. Bennett oversees fluid dynamic design and analysis of pumps, compressors, and turbines, including various sizes of hydroturbine generators.  This work includes detailed computational fluid dynamic (CFD) analysis, as well as test rig design, and flow loop/ wind tunnel validation testing.  Recently, he has supported major law firms with expert report writing and detailed two-phase flow unsteady CFD analysis of 100MW and 400 MW hydroturbines in the US and Canada.

Paul A. Boyadjis is Director of Rotating Machinery Analysis for MSI.  Mr. Boyadjis has a BS and MS in Mechanical Engineering from Lehigh University where he graduated summa cum laude.  He has over 35 years of diverse experience in the analysis and Design of Centrifugal Pumps and Pumping Systems, as well as Centrifugal Compressors. His specialty includes complex 3D solids modeling for stress and vibration analysis using advanced finite element techniques, and he has worked as a lead analytical engineer for major manufacturers. 

Mr. Boyadjis is also an expert at rotordynamics, and field testing. He has enjoyed participating as a Hydraulic Institute Standards Partner for over a decade, and became vice chair of its Vibration Committee, and was named Standards Partner of the Year in 2021.  Paul played a key role in various standards. 

Years ago, Mr. Mr. Boyadjis developed the solids modeling and advanced finite element analysis capabilities at the Government Marine Business unit of Ingersoll-Rand, and wrote many of the structural and vibration analysis procedures for that division. As mergers took place, he then transferred these analytical capabilities to the Research and Development group of Ingersoll-Dresser Pump and later Flowserve.

While with MSI, Mr. Boyadjis has conducted detailed 3D finite element analysis of failed casings and impellers, performing forensic investigations, and when necessary, providing successful design enhancements for industrial and municipal customers. He has directed or participated in many testing and troubleshooting projects, particularly for water and wastewater pumping systems.

View MSI's Consulting Profile.

Florida Office:
Andrew Avalon, PE, PSP
Chairman & CEO
8633 Willow Kane Court
Orlando, FL 32835
aavalon@long-intl.com
T: (407) 445-0825     F: (407) 650-3399

Long International provides expert engineering and construction claims analysis, expert testimony, project management consulting, and insurance claims analysis services. We focus on projects in the following industries: building and construction; gas, gasification, GTL, LNG, and NGL; industrial and manufacturing; mineral and mineral processing; offshore oil and gas; oil sands; pipelines and utilities; power; refineries, petrochemical, and chemical; transportation; and water, wastewater, dams, and marine. We analyze claims, not limited to, disputed change orders, schedule delay, acceleration, time extensions, liquidated damages, loss of productivity, defective specifications, and deficient project management performance.

Richard J. Long, P.E., P.Eng., Founder of Long International, has over 50 years of U.S. and international consulting experience involving construction contract disputes analysis and resolution, arbitration/litigation support and expert testimony, project management, engineering/construction management, cost and schedule control, and process engineering. As an internationally recognized expert in the analysis and resolution of complex construction disputes for over 35 years, Mr. Long has served as the lead expert on over 300 projects having claims ranging in size from US$100,000 to over US$2 billion. He has presented and published numerous articles on claims analysis, entitlement issues, CPM schedule and damages analyses, cumulative impact claims, and claims prevention.

Rod C. Carter, CCP, PSP is President of Long International and has over 20 years of experience in construction project controls, contract disputes and resolution, negotiations, mediation, arbitration support, and expert testimony on scheduling, loss of productivity, and quantum issues.  He has experience in entitlement, schedule, and damages analyses on over 30 construction disputes ranging in value from US$100,000 to US$7 billion, related to oil and gas, oil refinery, LNG, heavy civil, nuclear, environmental, chemical, power, industrial, commercial, and residential construction projects. Mr. Carter specializes in loss of productivity, cumulative impact, and quantum calculations, and had a lead role in assessing damages on more than a dozen major disputes.  In addition, Mr. Carter has developed cost and schedule risk analysis models using Monte Carlo simulations to address the uncertainty of estimates and claims.

Scott M. Francis, P.E., PSP is a Vice President of Long International and has over 20 years of experience in project management, contract disputes analysis and resolution, CPM schedule preparation, execution, and analysis, productivity analysis, contract administration, design engineering, construction management, and government contracting.  He provides schedule development and assurance services, cost estimating, and claims analysis services on projects for both owners and contractors.  Specific responsibilities include CPM development and reviews, CPM schedule delay and acceleration analyses, change order impact analysis, issue identification, correlation of impacts to schedule activities, and productivity evaluations.

Roger W. Griffith, P.E. is a professional Mechanical Engineer with over 40 years of experience in designing, maintaining, and operating mechanical systems (Plumbing, HVAC, and Fire Sprinkler Systems). As the principal of Griffith Engineering & Consulting for 23 years, his design experience with commercial and industrial projects includes convention centers, schools, office buildings, condominiums, apartment buildings, hotels, manufacturing facilities, medical buildings, restaurants, dormitories, fire halls, and maintenance facilities.

Litigation Support - Since 2002, Mr. Griffith has provided thorough, credible, and timely forensic engineering, consulting, and expert witness services. He also assists clients through the mediation and arbitration process. His expert testimony is based upon independent and impartial investigation, research, analysis, and testing. His services include written reports and the preparation of exhibits. Mr. Griffith's expertise is available to plaintiffs and defendants on the issues of plumbing, mechanical, and fire sprinkler system defects and failures. 

His specific areas of expertise include hot water scalding, carbon monoxide poisoning, and legionella. Mr. Griffith has served on numerous codes and standards committees related to areas, including the NFPA 54 Fuel Gas Code, the ASSE Scalding Awareness Task Group, the Uniform Codes' Legionella Task Groups, and the ICC Plumbing/Mechanical/Fuel Gas Code Action Committee. 

He is a Professional Engineer in Alabama, Arizona, Arkansas, Colorado, Delaware, Florida, Georgia, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maryland, Michigan, Minnesota, Mississippi, Missouri, Nebraska, New York, North Carolina, Ohio, Oklahoma, South Carolina, Tennessee, Texas, Utah, Virginia, West Virginia, and Wisconsin.

Areas of Expertise:

View Roger W. Griffith's Consulting Profile.

Due Diligence Professional Services, Inc. (DDPSI) is a Construction Consulting and Expert Witness Firm that Specializes in Supporting Litigation and Representing Clients for Renewable Energy, Power, Heavy Civil, Underground Utilities, Building and other related Construction Specialty Projects. They are a diverse team with construction claims and project management expertise who value the importance of relationships and continue to distinguish themselves by showing clients that Experience + Talent + Strategy = Results.

Litigation Support - DDPS understands the complexities of dispute resolution and work extensively with attorneys to identify documents, prepare computerized document databases, establish document shared files, support witness statements, and prepare expert reports. Their construction and engineering litigation expert witnesses participate hands-on in all projects. They develop the methodology of analyses, analyze the relevant documentation, and develop support for opinions.

• Renewable Energy - Utility Scale Wind, Utility Scale PV Solar, Utility Scale Concentrated Solar Power, Biomass and Battery Storage
• Heavy Civil - Earthwork, Roads, Bridges Highways and Airports
• Power - Transmission, Distribution and Substation / Switching Yards
• Underground Utilities - Water, Reclaimed Water, Storm Drainage, Sanitary Sewer/Lift Stations, and Force Main
• Buildings - Commercial, Institutional, Industrial, and Heavy Civil
• Construction Specialties - Dewatering, Directional Drilling/Jack and Bore, Low Pressure Sewer, Fiber Optic Systems, Reinforced Earth Wall, Sound Barrier Wall, Telecommunication Infrastructure, Transformer – RCA of failures and Transmission Line Pole Remediation

Nicholas Fiduccia is President and Co-Founder of Due Diligence Professional Services, Inc. a Florida based expert witness service, construction claims specialist and project management consulting firm that focuses its practice on law firms, owners, engineering, construction firms, and contractors performing renewable energy, power, heavy civil, underground utilities, building and other related construction specialties.

Mr. Fiduccia has over 30 years of U.S. and Canadian construction experience involving construction contract disputes analysis and resolution, arbitration/litigation support and expert testimony, project management, engineering/construction management, cost and schedule control, and value-engineering.

Before co-forming Due Diligence Professional Services, Inc, Mr. Fiduccia had corporate-wide responsibility for technical management and oversight for the preparation and resolution of construction claims for 11 years for a utility-scale renewable energy and heavy civil infrastructure contractor, plus over 19 years of hands-on experience to ensure that profit, cost, schedule, scope, quality, and safety objectives were achieved for renewable energy, power, heavy civil, underground utilities, building and other related construction specialty projects.

Ron Ritter, Vice President and Co-Founder of Due Diligence Professional Services, Inc. has been responsible for on-site project management for Wind, Solar, Battery Energy Storage System (BESS) Projects, Heavy Civil Projects, and Underground Utility Projects over the last 25 years.

Mr. Ritter’s expertise in a full array of self-perform and key subcontractor oversight has allowed him to execute multiple EPC contracts successfully and safely. 

Before co-forming Due Diligence Professional Services, Inc, Mr. Ritter successfully built a career in the construction industry that consisted of 45 years of hands-on, field experience. Twenty (20) years of that field experience has been spent building and supervising the construction of renewable energy facilities. Seventeen (17) years of his construction career have been spent as the senior field representative, directly responsible for the safe, timely, profitable and quality construction of 15 wind farms in the USA totaling 2,465 megawatts.  Mr. Ritter has also worked on and supported the construction of wind farms and solar farms in Canada.  

View Due Diligence Professional Services, Inc.'s Consulting Profile.