Occupation Health and Safety / OSHA Compliance Expert Witnesses
expert witnesses
Enterprise Software Litigation Experts Panorama Consulting Group
Bill Baumann
Director of Software Expert Witness
Denver CO USA
phone: +1 720.515.1377 ext. 117
Ergonomics Industrial Engineering Expert Witness Page Engineering
George B. Page, CPE
Founder
1402 E. Kimmel Rd.
Jackson MI
49201
USA
phone: 517-782-3154
Commercial Transportation Expert Witness Michael Buck
Michael C. Buck
President
9 Retriever Run
Charleston IL
61920
USA
phone: 912-571-9149
Mine Safety Expert Witness Tim Martin
Tim A. Martin
President
516 Chandler Drive
International Services
Point Pleasant WV
25550
USA
phone: 606-923-3442
Engineering Expert James Miller
James M. Miller, PE, PhD
Founder
2392 Fuller Court
Ann Arbor MI
48105
USA
phone: 734-662-6822
fax: 734-747-9712
Trucking Technology Expert Witness Joel Beal
Joel Beal
Owner
PO Box 122346
Arlington TX
76012
USA
phone: 817-480-0926
Forensic Safety Analyses Expert Kenneth Solomon
Dr. Kenneth A. Solomon
Chief Forensic Scientist, Technical Director
5324 Canoga Ave.
Woodland Hills CA
91364
USA
phone: 818-348-1133
fax: 818-348-4484
Industrial Hygiene Expert Witness Dr Eric Brown CIH CSP
Dr. Eric N. Brown, CIH, CSP
Long Beach CA USA
phone: 888.988.8867
Healthcare Expert Lamar Blount
L. Lamar Blount
CPA
P.O. Box 2166
Roswell GA
30077-2166
USA
phone: 770-645-5989
fax: 770-274-6651
Habitat Engineering Expert Fari Barzegar
Dr. Fari Barzegar
Ph.D., P.E., CPEng
446-17th Street, Suite 300
Oakland, CA 94612
All States USA, International, CAN, AUS
phone: 510-891-0300
fax: 510-891-0333
Engineering Expert Vincent Ettari
Design, Analysis, Expert, Trial, Forensic Witness
Counties of Westchester, Rockland, Queens, Putnam
Dutchess, Orange, Ulster, Nassau, Suffolk, Bronx, Statin Island
Richmond & Brooklyn / Kings County Long Island / NY City / Manhattan / White Plains
Shrub Oak NY
10588
USA
phone: 914-245-6320
fax: 914-245-6335
Environmental Health Safety Expert Dan Napier
Dan Napier
President
2520 Artesia Boulevard
PO Box 2208
Redondo Beach CA
90278
USA
phone: 310-644-1924 X 103
fax: 310-406-1939
Occupational Health and Safety Expert Witness Mark Franklin
Mark Franklin
OSHA Safety and Health Trainer, and Consultant
Box 272
Somerset MA
02726
USA
phone: 508-479-5337
Construction Defect Expert Witness Sanford Loy
Sanford C. Loy , CCM, B.Arch, MSCE
Principal
200 Prosperity Drive
Knoxville TN
37923
USA
phone: 865-675-3603, ext. 102
fax: 865-675-0009
Construction Safety Expert Witness Timothy Galarnyk
Timothy G. Galarnyk
611 MAIN STREET
P. O. BOX 2833
Bandera TX
78003
USA
phone: 888-900-0276
Featured resources
by Howard Cannon and Shirley Waters
by James I. Ebert, PhD
by Chuck Easttom
George B. Page, CPE, is a Certified Professional Ergonomist. Since founding Page Engineering, Mr. Page has been providing ergonomics services, integrating multiple disciplines (industrial engineering, safety, health, business, regulatory) to provide effective results, whether in the application of job analyses and job improvement processes or in physical job demands analyses. His experience includes conducting ergonomics analyses and research in the railroad industry, primarily, and in heavy industry, in general, for over 30 years. Clients include Union Pacific Railroad, Kansas City Southern Railways, Association of American Railroads, FedEx, American Petroleum Institute, Food Marketing Institute, Food Distributors International, Blue Water Bridge Authority, USPS. His expertise includes job exposure assessments, physical demands assessments, accident reconstruction, and forensic engineering.
Greg G. Weames, CPE, CCPE, CRSP, is a Certified Professional Ergonomist who provides forensic services regarding Musculoskeletal Injury / Disorder Risk and expert testimony. Since joining Page Engineering, Inc., Mr. Weames has been asked to provide consulting services in ergonomics for over 500 cases involving civil lawsuit work-related injury/disorder claims. With training, education, and experience in musculoskeletal injury and musculoskeletal disorder as a focus, he applies generally accepted methodology in his analysis of causation to a reasonable degree of scientific certainty. Mr. Weames has his expert witness experience from within the railroad industry, which includes transportation, construction maintenance, mechanical shop, communications, and office environments that support a large variety of jobs and work tasks. Over the past 20 years of providing expert witness services, Mr. Weames has relied on independent, objective measurements of claimed exposures to occupational physical factors and the epidemiologic scientific literature, relevant ergonomics guidelines, and standards to support his opinions. Mr. Weames has given depositions and has appeared at jury trials in both State and Federal US courts during his years doing expert witness work.
Stephen D. Fleming, CPE, CXLT, is an Industrial Engineer / Ergonomist whose background includes analyzing work environments and work tasks using industrial engineering work measurement methods and risk assessment models for different body regions. His expertise is in assisting industrial clients in applying ergonomics to workplace processes, tools, and equipment, including all major North American railroads, FedEx, Ford Motor Company, Lear Seating, USPS, and the Blue Water Bridge Authority. Mr. Fleming has been acknowledged for developing and implementing a methodology for measuring and analyzing exposure to whole-body vibration (WBV) and hand-arm vibration (HAV).
Michael C. Buck, President of MCB Consulting,
Tim A. Martin has more than 48 years of industry experience and is the leading Mine Safety Expert in the US. He provides litigation support as an expert witness and mine safety consultant, assisting the legal community in navigating through complicated mine safety cases.
Joel Beal is an expert in Truck Technology with a focus on electronic logging devices (ELDs), telematics, regulatory compliance, and accident analysis. He is a nationally recognized expert with over 35 years of experience.
L. Lamar Blount, CPA - During 30+ years in serving the healthcare industry, Lamar has provided consulting services for hundreds of clients in over 40 states. Lamar co-authored two editions of books on Billing and Reimbursement for the AMA.
Timothy N. Henry, CPA is Vice President of Consulting Services, managing our team of multi-disciplinary consultants. He has served as a consulting or testifying expert on 200+ cases for Health Law Network since 2012, representing plaintiffs and defendants in Medical Billing and Reimbursement Disputes in multiple U.S. district and State Courts. He has also served in cases involving Medicare and Medicaid reimbursement issues, Medicare fraud, managed care contract payment disputes, life care plan projections, and lost profit and economic damage claims.
Tony W. Ulbrandt, MAcc, CFE, is HLN’s Executive Vice President and helps set the firm’s strategic direction. Tony previously served as a Consulting Manager with HLN and has served as a consulting or testifying expert on 200+ cases for Health Law Network since 2013, serving plaintiffs and defendants in medical billing and reimbursement disputes in multiple US District and State Courts. He has also served in cases involving medical malpractice, healthcare fraud, Medicare fraud, Qui Tam lawsuits, criminal sentencing hearings, and lost profit and economic damage claims.
Mark Franklin has over 28 years of experience in Environmental, Health, and Safety Management, Training and Consulting-across many industries, including construction, manufacturing, chemical, pharmaceutical and others. Mr. Franklin has applied industry experience in chemical emergency response, hazardous waste management, safety and environmental program management, OSHA regulatory compliance, and management program auditing (safety, quality, environmental).Mr. Franklin is a highly experienced, dynamic trainer in over 80 individual training topics.
Sanford C. Loy , CCM, B.Arch, MSCE, has over 40 years of experience in the Construction Industry. Mr. Loy has Degrees in Architecture and Engineering. A Certified Construction Manager (CCM), he is committed to the Code of Ethics and Standards of Professional Practice established by the Construction Management Association of America. CCM is the ANSI accredited professional designation for construction management and is the gold standard for CM service providers in over 145 countries.
Timothy G. Galarnyk: Educated in Construction and Safety. Continued Training in Construction and Safety. More than 45 Years of HANDS-ON Field Experience. Actively involved in construction since 1976. Equipment operator, member of International Union of Operating Engineers since 2004, Certified by ATSSA in Construction Work Zone Traffic Control - MUTCD since 1988. More than 1,000 Incidents Independently Investigated. 

