Mining and Mining Equipment Expert Witnesses: 3

Greg Gerganoff, CSP, Esq., possesses extensive experience in safety compliance and practice involving OSHA and MSHA.  He obtained is law degree from Western Michigan University, Cooley Law School and practiced general civil law for approximately 12 years in Colorado prior to entering the safety profession. Mr. Gerganoff earned a Certified Safety Professional certification and has 18 years of field safety experience in mining, oil and gas, construction, manufacturing, power plant outages, and light rail construction.

His professional safety experience includes OSHA / MSHA Safety field work and compliance with experience in the heavy construction, manufacturing, light rail construction, power plant outages, public schools, oil and gas, mining, pipeline, and trenching and excavation industries.

• Authorized Outreach Trainer for OSHA General Industry.
• PEC Safeland Basic and Core instructor (Oil and gas).
• MSHA Approved Instructor (Blue Card) for Surface, Metal/nonmetal.
• Member of the American Society of Safety Professionals.

Litigation Support: Mr. Gerganoff assists with discovery questions regarding safety matters. Safety opinions based upon statutory, administrative, judicial rulings and related industry association safety policies ancillary to OSHA and MSHA.  Mr. Gerganoff is retained by attorneys for both Plaintiff and Defendant. Some of the subject matter litigation he has handled include:

View Greg Gerganoff's Consulting Profile.

Mechanical Solutions, Inc. (MSI) performs litigation support through its extensive engineering capabilities, and when required, through expert testimony. MSI uses advanced finite element analysis (FEA), rotor dynamics, and torsional analysis tools, and uses computational fluid dynamics (CFD) to analyze 3-D steady or unsteady fluid flows and heat transfer, enabled by its 230 high speed processor supercomputers.

MSI also uses top-of-the-line testing equipment, including multichannel FFT analyzers (up to 200 simultaneous channels) to accurately read the outputs of various vibration, stress/strain, and pressure sensors, as a function of both time and frequency. As a unique additional test capability, MSI uses motion magnification video cameras to amplify and display scene vibration by 1000x. MSI uses calibrated exciters while equipment remains running, to locate structural, rotor, and acoustic natural frequency resonances as they exist at any particular operating point, without interfering with machinery operation. In addition, MSI performs stress, acoustic, dynamic pressure pulsation, electric current spectrum, and aero/hydraulic performance testing.

Areas of Expertise:

Solving Challenges with Rotating Machinery Vibrations

William D. Marscher, PE, performs expert witnessing and engineering work in the field of Fluid Systems and their Rotating and Reciprocating Machinery, particularly large turbines, generators, compressors, and pumps. His typical work responsibilities include design, analysis, and testing of all types of plant machinery, as well as other types of fluid and mechanical systems. Mr. Marscher has background in various types of turbines (including hydraulic, steam, and gas), as well as various types of pumps, including centrifugal as well as positive displacement (e.g. reciprocating, gear, rotary, and screw).

Mr. Marscher's expert witnessing experience includes 27 cases over the course of his 50+ year career, for which he provided detailed engineering reports in support of the case. This legal support experience includes witnessing in front of tribunals four times, and testifying in Federal Court in four cases. He also has performed depositions 11 times. 

For the past 45 years, Mr. Marscher has been a voting member of the ASTM Fatigue Standards Committee E9, as well as the ASTM Wear & Erosion Standards Committee G2. He is also the past Board of Directors Chairman for the Machinery Failure Prevention Technology Society (MFPT), and has been active in the Vibration Institute. Mr. Marscher is a 23-year member of the Texas A&M Turbine-Pump Users Symposium Advisory Committee (essentially the Board of Directors for the Symposium). For ASME, he was Chair of the Predictive Maintenance committee and was Organizing and Presiding Chair of the 1993 RoCon Rotating Machinery Conference and the 1995 Tribology Conference.

Dr. Edward Bennett is MSI’s VP of Fluids Engineering.  Dr. Bennett graduated from the Naval Academy, following which he was a navy test pilot.  Later he received his PhD in Fluid Dynamics from Johns Hopkins University. Dr. Bennett has been a well-known leader in Fluid Dynamics and the Aero/hydrodynamic Design of Turbomachinery for the past thirty plus years.  

In 1995, Dr. Bennett founded ASC Turbo, a design house that combined the CFD software from Advanced Scientific Computing and specialized turbomachinery design software.  During this time, he worked on the development of BladeGen, a 3-dimensional turbomachinery blade geometry kernel, and also performed a key role design work that included the starter turbine and vapor cycle compressor for the F-22 Raptor fighter, several biomechanical cardiac pumps, a LOX rocket turbopump, as well as numerous more “conventional” turbomachinery designs. After this, he served as Director of Turbopumps for Gencorp Aerojet, and authored the hydraulic design methodology that is still in use by that organization.

At MSI, Dr. Bennett oversees fluid dynamic design and analysis of pumps, compressors, and turbines, including various sizes of hydroturbine generators.  This work includes detailed computational fluid dynamic (CFD) analysis, as well as test rig design, and flow loop/ wind tunnel validation testing.  Recently, he has supported major law firms with expert report writing and detailed two-phase flow unsteady CFD analysis of 100MW and 400 MW hydroturbines in the US and Canada.

Paul A. Boyadjis is Director of Rotating Machinery Analysis for MSI.  Mr. Boyadjis has a BS and MS in Mechanical Engineering from Lehigh University where he graduated summa cum laude.  He has over 35 years of diverse experience in the analysis and Design of Centrifugal Pumps and Pumping Systems, as well as Centrifugal Compressors. His specialty includes complex 3D solids modeling for stress and vibration analysis using advanced finite element techniques, and he has worked as a lead analytical engineer for major manufacturers. 

Mr. Boyadjis is also an expert at rotordynamics, and field testing. He has enjoyed participating as a Hydraulic Institute Standards Partner for over a decade, and became vice chair of its Vibration Committee, and was named Standards Partner of the Year in 2021.  Paul played a key role in various standards. 

Years ago, Mr. Mr. Boyadjis developed the solids modeling and advanced finite element analysis capabilities at the Government Marine Business unit of Ingersoll-Rand, and wrote many of the structural and vibration analysis procedures for that division. As mergers took place, he then transferred these analytical capabilities to the Research and Development group of Ingersoll-Dresser Pump and later Flowserve.

While with MSI, Mr. Boyadjis has conducted detailed 3D finite element analysis of failed casings and impellers, performing forensic investigations, and when necessary, providing successful design enhancements for industrial and municipal customers. He has directed or participated in many testing and troubleshooting projects, particularly for water and wastewater pumping systems.

View MSI's Consulting Profile.

Tim A. Martin has more than 48 years of industry experience and is the leading Mine Safety Expert in the US. He provides litigation support as an expert witness and mine safety consultant, assisting the legal community in navigating through complicated mine safety cases.

Mr. Martin’s vast experience in investigating mining accidents, as well as major mining disasters, has placed his experience in high demand to provide mine safety consulting and expert witness services to numerous law firms across the US.

Litigation Support - Mr. Martin serves as an Expert Witness and Litigation Consultant for numerous pivotal Civil and Criminal Cases throughout the United States. He also provides expert safety consulting services to the Metal Non-Metal mining industry, the Coal Mining Industry and the Aggregate and Stone Mining Industry including Gold, Silver, Copper, Iron Ore, Bituminous Coal, Anthracite Coal, Lignite Coal, Stone, Sand and Cement operations throughout the United States and South America.

Areas of Expertise:

Background Experience - Tim Martin has been navigating complex MSHA and OSHA regulations in mining cases for decades. His expertise spans various mining types across the US and South America, including coal, gold, silver, and ore operations, among others.

Mr. Martin's involvement in the mine rescue community and direct participation in notable disaster recoveries, such as the Sago and UBB Mine Disasters, highlight his hands-on experience. He played a pivotal role as the lead mine safety expert in high-profile criminal cases and civil litigations, covering issues like respirable dust exposure and hazardous materials. With numerous safety certifications and recognition for his contributions, Mr. Martin has designed top-tier health and safety educational programs acknowledged by the US Department of Labor.