Design Engineering Consultants: 23

OrthoBioMech LLC provides Medical Device Development and Injury Biomechanics Analysis services to the orthopedic and legal fields. The founder, Mari S. Truman, PE, has more than 37 years of experience in Orthopedic Product Design and Development. As Principal Engineer, she acts as an R&D design and development consultant to the orthopaedic industry and an injury biomechanics and medical device forensic expert.

While working for and with the major US Orthopaedic companies, she designed numerous instruments and implants for repair of skeletal injury. Ms. Truman is named on 12 Orthopaedic Patents and frequently gives talks on implant design and injury biomechanics on topics such as: knee and thumb-based joint surfaces and kinematics, joint design, rapid prototyping, medical device design control, and injury biomechanics.

Ms. Truman founded and ran ArthroMotion (1993-1997) and Seabrook International LLC's Midwest Design Center (1999-2002). Her project experience (non-inclusive):

• Total and Hemi Joint Resurfacing Systems: Hip, Knee, Wrist, Ankle, Hand/Toe, CMC, PIP, DIP, Shoulder
  
• Trauma Systems: Plates, specialty screws, intramedullary nails, wires, cables, external fixation systems, spinal fusion systems
  
• Soft Tissue Reattachment Systems

Speaking Venues: ASME Congress, North American Spine Society, Southern Biomedical Engineering Conference, International Society of Biomechanics, National Manufacturing Week Conference, American Society for Surgery of the Hand, International Hand and Wrist Biomechanics Symposium, International Federation of the of the Societies for Surgery of the Hand, Vth International Symposium on Computer Simulation in Biomechanics, Indiana Medical Device Manufacturer’s Council, Ohio Bar Association and the Ohio Trial Lawyer’s Association.

View Mari S. Truman's Expert Witness Profile.

R. Kevin Smith PE, BSME, MMAE, has been a specialist in Engineering Forensic Safety and Design for 35 years. He has consulted on over a 1,000 matters nationwide. Mr. Smith is a registered professional engineer and holds a BSME and MMAE from the Illinois Institute of Technology in Chicago. He specializes in Material Handling Equipment Safety, including lift trucks, dock safety, truck loading, conveyors, and aerial work platform safety.

Mr. has been actively involved as a member of the committee that writes the Safety Standard for Low Lift and High Lift Trucks (ASME/ANSI B56.1) for over 30 years. He also serves on the B56.6 committee (rough terrain lift trucks) and the ANSI A92.5 and A92.6 subcommittees (self-propelled elevating work platforms). 

Litigation Support - Mr. Smith formerly worked for Triodyne, Inc. for over 15 years as a forensic engineer/principal engineer. As President of R. K. Smith Engineering Inc., he currently has a laboratory for examination and testing, and owns or has access to varied testing equipment and tools. He has testified at depositions and trials on several hundred matters. Mr. Smith has performed hundreds of investigations into product failures involving injury and property damage, and has reconstructed numerous accidents. His expertise is available to counsel representing both Plaintiff and Defendant. Mr. Smith also is on the Adjunct Math faculty at Prairie State College. 

Areas of Expertise:

Forklift Trucks Aerial Work Platform Lifts Product Testing Material Handling / Lifting / Rigging Equipment Accident Reconstruction Machine Guarding Safeguarding Warnings

Agricultural and Construction Equipment Skid Steer Loaders Stability Testing Loading Dock Safety Consumer Products / Testing OSHA Citations Codes & Standards Standard of Care in Design

View R. Kevin Smith's Expert Witness Profile.

Robert O. Peruzzi, PhD, PE is a Licensed Professional Electrical Engineer with particular expertise in Mixed-Signal Integrated Circuits (MSICs). His subspecialty within this broad category is with Integrated Circuits (silicon chips) used for signal-processing. Dr. Peruzzi's recent clients include Quantenna Communications, Wavefront Research, LSI, Berkeley Design Automation, among others. Examples of Signal Processing Systems:

• Telephones, mobile phones, cell phones
• Data recording and retrieving systems for magnetic media such as disk drives
• Radio transmitters / receivers - low noise amplifiers, filters, automatic gain control and frequency mixers
• Audio amplifiers
• Audio recording / reproduction systems
• Heat, ventilation, air conditioning controllers
• Data transmitting / receiving systems

Areas of Expertise:

• Behavioral modeling of analog/mixed-signal circuits using Verilog-AMS, VHDL-AMS or MATLAB/Simulink
• Specific verification requirements
• High-speed verification using real-value modeling techniques
• System-level design exploration
• Executable design specs

View Expert Witness Profile.

Rieser Building Group is a leading builder, engineer, architect, and forensic team with over 25 years of experience in management, design, and construction of over 4,000 units. These units range from custom homes, commercial buildings, and developments, to public works like Caltrans and BART construction, and roadway improvements (over 500 miles). With a full breadth of professional development services, they manage all aspects of a project, from entitlements to design to warranty.

Building Services - Design in-house, or, as licensed engineering and construction professionals, Rieser Building Group can manage an outside team of architects, civil engineers, structural engineers, and landscape architects.

Engineering and Design Services - Spearheaded by a professional Engineering & Architectural team, Rieser provides innovative designs and timely approvals in custom homes, commercial buildings, apartments, large developments, structures, topo-mapping, hydraulics, traffic engineering, and transportation engineering.

Development Services - Developing single custom-built home or a multiphase project, Rieser will expedite the development process, establish a joint venture to share costs, or purchase the project. In addition to flexible management, they conduct property feasibility studies to calculate the right mix of homes and maximize ROI. 

Mark E. Rieser, II, MS, PE, AIA, GBC, GEC, has over 30 years of experience in the Construction and Building Design industry. He provides his clients with a comprehensive knowledge of Construction Technology and Construction Standards of Professional Practice. Background Experience - President of an active Design / Build company, Mr. Rieser has managed, designed, and constructed over 4,000 units to include high-rise, single family homes, condominiums, townhomes, podiums, apartments, and commercial buildings, His experience includes construction, management, and design of over 500 miles of asphalt and roadway improvements, tunnels, San Francisco Airport, Santa Clara Light Rail, Southern Pacific Railroad, Caltrain, and BART. Mr. Rieser has an insightful understanding of Civil / Structural Engineering, Soil Engineering, Transportation / Traffic Engineering, Hydraulic Engineering, Architectural Design, Asphalt Design, Cost Estimation, Public Works Design Bidding and Estimation, General Engineering, General Building, and an Accident Reconstruction expert.

NorCal Headquarters San Jose Office 2033 Gateway Pl Suite 500 San Jose, CA 95110	San Francisco Office 425 Market St Suite 2200 San Francisco, CA 94105	SoCal Headquarters Los Angeles Office 10100 Santa Monica Blvd. Suite 300 Los Angeles, CA 90067	Sacramento Office 777 Campus Commons Rd Suite 200 Sacramento, CA 95825

View Mark Rieser's Expert Witness Profile.

Award winning, Oxford Educated scientist whose areas of expertise include medical imaging, electronics, semiconductors, medical devices, sensors, MEMS, signal processing and image processing. Dr Daft has deposition and trial testimony experience. Extensive Intellectual Property experience including patent development, analysis, licensing, and litigation. Serial inventor who holds 23 U.S. Patents with several pending. Completed more than 98 hours of SEAK Expert Witness Seminars, including patent-specific training. Diverse industry experience including multi-nationals such as GE, Medtronic, Fujifilm, Samsung and Siemens as well as several start-ups. Well published. Winner of grants from National Institute of Health. Extensive international consulting experience. IEEE (Institute of Electrical and Electronic Engineers) Senior Member since 2004. Three years’ experience teaching electrical and computer engineering at the University of Illinois. Holds BA and MA in Physics from Oxford University as well as Doctorate from Oxford in Materials Science.

View Dr. Christopher Daft's Expert Witness Profile.

SepiSolar is a national solar-plus-storage design, engineering, and consulting company, where passion meets expertise in upholding the integrity of the Solar Industry. As fervent advocates for sustainable energy, we have positioned ourselves as the premier Business Consultants for solar-related matters. Our commitment to transparency, ethical practices, and cutting-edge knowledge has made us a trusted authority in the field. 

Joshua Weiner, NABCEP, founder of SepiSolar, leads a growing team of designers, engineers, and technical consultants. He is an experienced solar, energy storage, and micro-grid design and engineering executive and consultant with a demonstrated history of product, project, and business development success. Mr. Weiner is skilled in developing early-stage business units, new program / product implementation, project development, product design / integration, and scaling teams to address customer and market needs by deploying sustainable, clean, plug-and-play services and solutions. His expertise extends to residential, commercial, industrial, and utility scale markets as well as energy storage and solar microgrid technologies.

Consulting Services:

Solar PV Systems Financial and Technical Solar Engineering and Design Solar Batteries and Solar Storage Solar Microgrids Residential, Commercial and Utility Scale Solar

Project Management Technology Due Diligence Contract Structures Public Health and Safety Codes Municipal Permits Industry Codes and Standards

View Joshua Weiner's Expert Witness Profile.

Mechanical Engineer - Turbomachinery Expert. Gas turbine engines, steam turbines, jet engines, compressors, pumps, expanders, generators, cogeneration, combustion equipment, diesel engines, and reciprocating compressors. 

Failure analysis, stress analysis, mechanical design, design analysis, troubleshooting, performance analysis, durability assessment. Access to metallurgical laboratory. Experienced Expert witness. 

Please see our Service List at https://sbkushnick.com/servicelist.pdf for a concise description.

Summit Associates of Bedford is a Materials and Manufacturing firm offering growth strategy, operations improvement, and international sourcing to commercial clients ranging in size from $3 to $150 million.

Summit Associates has a record of fixing troubled organizations and driving growth in complex technology based operations. Skilled at positioning small and middle market companies for sustained growth, they have commercial experience in ten countries, including creation and oversight of global partnerships in Europe and India and acquisition, sale, and licensing of fifteen technologies in seven countries.

Consulting Services:

Turnaround Leadership Organizational Change and Alignment Accelerated New Product / Market Development Product Launch

Lean Manufacturing Technology Acquisition Sale and Licensing International Partnerships Technology Valuation

Principal, Thomas W. Caldwell, PE, has over 40 years of experience in Materials Research and Development, Process and Product Development, and Manufacturing Operations in the Precision Cast and Machined Products industry.

Mr. Caldwell has designed and manufactured components for consumer and industrial products, including safety-critical applications such as aircraft landing gear brakes, seat belt lockup devices, windshield wiper, and window lift motor systems. He has experience creating and guiding technology development and manufacturing partnerships in Europe and Asia, licensing and selling intellectual property and creating supply chains in China.

Mr. Caldwell has lectured in the USA, Germany, Switzerland, and India on manufacturing premium quality metal products and manufacturing processes, and was a technical paper peer reviewer for 20 years for the Society of Automotive Engineers. A United States patent holder, he has published peer reviewed research in electrochemistry and materials processing, and has written and spoken numerous times on the subject of Materials Selection.

View Thomas A. Caldwell's Expert Witness Profile.