By: Kristopher J. Seluga, PE
Tel: (203) 329-9909
Email: Technology Associates
Structural failure can often produce catastrophic results. In many cases, the damage seen after the accident is not indicative of the cause of the initial failure. Fortunately, based on physical evidence, an investigator can frequently determine how and why a structure failed. The most common reasons for a failure include defective materials, defective design, improper assembly, excessive or improper loading or a combination of these. Through testing and structural analysis, it is possible to determine the root cause of the failure and propose solutions to prevent such failures from reoccurring.
We have some 50 years of varied experience in many aspects of structural analysis including:
7/31/2009· Accident Investigation & Reconstruction
Forensic Engineering Experts: Electrical Fires
Electric fires are becoming more common as appliances and electric feeds are used more and more in our daily lives. Like other fires, the root cause of an electric fire is the introduction of heat, oxygen, and fuel.
7/31/2009· Accident Investigation & Reconstruction
Forensic Engineering Experts: Computer Simulation
When an understanding of complex motions associated with various accidents is required, computer simulation is an invaluable tool, which allows the modeling and visualization of rollovers and collisions. In addition to vehicle accidents, computer simulation can also be used to create many other systems of masses and contacting surfaces, such as a toppling light pole after it has been struck.
5/14/2009· Accident Investigation & Reconstruction
By: Shawn Gyorke
While the information recorded on event data recorders (EDRs), commonly referred to as vehicle black boxes, is tremendously helpful in determining how a traffic accident occurred and in improving safety, it was not until recently that EDR data was legally challenged in Illinois and ultimately accepted
